Tag Archive for: AES Tech

Spray application of thermal insulation coating Aes Techon an industrial metal storage tank

Thermal Insulation of Industrial Tanks: Heat Loss, Condensation, and Inspection Accessibility

Summary: Thermal insulation for industrial tanks is not just about reducing energy loss. In metal tanks, it is also necessary to consider condensation, the risk of Corrosion Under Insulation (CUI), exposure to atmospheric agents, and the need for periodic inspections of the structure. Thin-film nanotechnological insulating coatings represent an interesting solution, especially when complex geometries, limited space, and maintenance requirements make bulky insulation systems impractical.

Table of Contents

  • Why thermally insulate an industrial tank

  • Heat loss and temperature fluctuations

  • Condensation and corrosion under insulation

  • Why accessibility for inspections is important

  • Thin-film nanotechnological insulation

  • How to properly design the intervention

  • FAQs on industrial tank insulation

 

Spray application of thermal insulation coating Aes Techon an industrial metal storage tank

Spray application of the thin-layer thermal insulation coating Aes Tech on the metal surface of an industrial storage tank.

Why Thermal Insulation of Industrial Tanks Requires a Specific Approach

A storage tank is not simply a large metal surface to be insulated. The temperature of the contained product, external weather conditions, solar exposure, humidity, thermal cycles, and maintenance requirements make every intervention unique.

Therefore, thermal insulation of industrial tanks must be evaluated by simultaneously considering heat loss or heat gain containment, surface protection, and subsequent inspection needs.

In tanks containing hot products, limiting outward heat flux helps maintain a more stable process temperature. Conversely, in tanks containing cold products, the goal is often to restrict heat entry from the surrounding environment and control the conditions that favor condensation formation.

Savenergy.it’s thin-film nanotechnological insulation solutions are applied to liquid tanks, return tanks, boilers, condensate lines, heat exchangers, and storage silos.

Heat Loss: It Is Not Just About Thickness

When a temperature difference exists between the tank’s contents and the outside environment, heat transfer inevitably occurs.

On large structures, even a relatively low heat loss per square meter can become significant when considering the total surface area of the tank.

For this reason, insulation evaluation should not stop at material thickness alone. System thermal characteristics, operating temperatures, solar radiation, metal substrates, exposure conditions, and coating continuity must also be taken into account.

Savenergy.it industrial solutions utilize coatings containing hollow ceramic microspheres and are designed to achieve thermal protection with very low thicknesses. AES Tech, for example, has an application thickness of approximately 1–4 mm.

The advantage of a low thickness becomes particularly compelling in complex areas: joints, supports, welds, connections, and irregularly shaped surfaces.

Condensation on Tanks: When Does It Form?

A second critical issue is condensation.

When the temperature of a metal surface drops below the dew point of the surrounding air, water vapor can condense on the surface.

In an industrial facility, this condition must not be overlooked. The prolonged presence of moisture near the metal creates favorable conditions for corrosive phenomena.

The issue escalates when water penetrates underneath an insulation system and remains trapped between the insulation and the metal surface.

Corrosion Under Insulation: The Problem of CUI

This is where Corrosion Under Insulation—commonly referred to by the acronym CUI—comes into play.

CUI is the corrosion that develops on metal surfaces beneath an insulation system. It is particularly insidious because the degradation may not be immediately visible from the outside.

AMPP emphasizes that moisture, insulation condition, protective coatings, thermal cycles, and outer jacket integrity are all key factors to consider when managing CUI risk.

The topic is significant enough to be addressed by API Recommended Practice 583 – Corrosion Under Insulation and Fireproofing, which reached its third edition in 2026. This Recommended Practice covers design, maintenance, inspection, and CUI mitigation, and explicitly includes storage tanks among the affected equipment.

Corrosion under insulation (CUI): comparison between traditional insulation and Savenergy.it nanotechnological coating on an industrial tank

Comparison between traditional tank insulation and a Savenergy.it nanotechnological coating applied directly to the metal surface, highlighting differences related to moisture, CUI and inspection accessibility.

Traditional Insulation Systems and Corrosion Risks

Traditional insulation systems can promote corrosion, as water and contaminants frequently manage to penetrate the system and reach the underlying metal.

Industrial Tank Thermal Insulation and Inspection Accessibility

This aspect is sometimes overlooked when choosing an insulation system. An industrial tank must remain accessible for inspection and ongoing maintenance.

Comparison between traditional insulation and Savenergy.it nanotechnological coating for inspection accessibility on an industrial tank

Technical comparison between traditional insulation and Savenergy.it nanotechnological coating, highlighting inspection accessibility on industrial tanks and critical components.

Traditional insulation systems can comprise multiple elements—insulating material, fasteners, moisture barriers, and external cladding—and, depending on the required inspection type, localized opening or removal may be necessary to reach the underlying metal surface.

A thermal insulation coating applied directly to the substrate transforms this scenario: it creates no hidden cavity between the insulation panel and the sheet metal, leaving the tank’s geometry immediately visible from the outside.

This provides a significant advantage for maintenance programs.

However, this does not mean that every inspection can be carried out without affecting the coating. The ability to perform non-destructive testing (NDT) through a coating depends on the specific inspection technique, material, thickness, and plant procedures. API RP 583 itself pays close attention to the capabilities and limitations of various non-destructive examination methods.

For this reason, inspection accessibility must be addressed during the design phase, not just when maintenance is due.

Nanotechnological Coatings for Thermal insulation of Industrial Tanks

In the field of industrial tank thermal insulation, thin-film technologies are particularly useful when combining insulation performance, seamless continuity, and geometric simplicity.

AES Tech by Savenergy.it is a water-based coating containing hollow ceramic microspheres. Designed for thin-film application, it is specifically intended for industrial tanks and silos.

AES TECH Key Technical Data:

  • Thickness: Approx. 1.0 – 5.0 mm

  • Thermal Conductivity: λd = (HotBox Test) 0.0010 W/mK

  • Solar Reflectance (SR %) (ASTM C1549): 84.3

  • Thermal Emissivity (IE %) (EN 15976): 87.4

  • Solar Reflectance Index (SRI %) (ASTM E1980): 105

  • VOC Content: < 0.003 μg/L (UNI EN ISO 16000-9:2024, 16000-6:2021, 16000-3:2022)

  • Reaction to Fire: Euroclass A

  • Pull-off Test: >2 on substrate; 0.55 ± 0.10 N/mm² layer-to-layer (ASTM D4541)

  • Maximum Operating Temperature: 240 °C

Technological M Key Technical Data:

  • Thickness: Approx. 0.6 – 1.0 mm

  • Thermal Conductivity: λd = 0.001 W/mK

  • Solar Reflectance (SR %) (ASTM C1549): 88.1

  • Thermal Emissivity (IE %) (EN 15976): 85.8

  • Solar Reflectance Index (SRI %) (ASTM E1980): 111.1

  • Maximum Operating Temperature: 180 °C

  • Corrosion Protection: Class C4 (Class C5 by adding TopCoat and Primer Manti Anticorrosion) – ISO 12944

  • Water Permeability: Class W3, 0.0754 kg/(m²h⁰·⁵) (UNI EN 1062-3)

The Savenergy.it industrial line is applied primarily via Airless spray systems, allowing seamless application over curved surfaces, fittings, and complex shapes without requiring pre-formed panels.

For storage tanks, this is especially beneficial on large surface areas or structural details that are difficult to insulate with rigid systems.

Download Savenergy.it Product Technical Datasheets

Research on thermal-insulating coatings has investigated the use of hollow microspheres as functional fillers for reducing heat transfer on industrial equipment and piping, while also considering the corrosion performance of the coating system.

Does an Insulating Coating Eliminate CUI Risk?

Yes, an insulating coating such as AES Tech or Technological M significantly reduces CUI risk.

The key benefit of a coating bonded directly to the substrate is that it eliminates the conditions typical of conventional systems, where moisture can penetrate and remain trapped underneath the insulation layer.

However, proper engineering design must still account for the substrate material, surface condition, operating temperatures, ambient environment, and planned maintenance procedures.

How to Choose Thermal Insulation for an Industrial Tank

Before selecting a solution, it is essential to determine fluid temperature, operating thermal range, ambient temperature and humidity, solar exposure, tank material, surface condition, existing corrosion issues, and the thermal target of the project.

Based on this data, the most appropriate coating cycle can be specified and verified for the specific application.

This step converts insulation from a simple outer coating into an integrated component of the plant’s thermal efficiency, protection, and maintenance strategy.

Thermal insulation of Industrial Tanks – FAQs

Why thermally insulate an industrial tank?

Insulation reduces heat exchange between the stored product and the environment, helping stabilize operating temperatures and control surface temperatures.

Can insulation help control condensation?

A properly sized system modifies surface temperature and helps manage conditions that lead to condensation. However, verification must consider temperature, relative humidity, and dew point under actual operating conditions.

What is Corrosion Under Insulation (CUI)?

CUI is a corrosive phenomenon that develops on metal surfaces hidden beneath an insulation system, typically in the presence of trapped moisture. It is a major issue in the petrochemical, chemical, and process industries.

How thick should nanotechnological tank insulation be?

It depends on the specific product and project requirements. AES Tech is applied at 1–5 mm, while Technological M ranges from 0.6–2 mm. Required thickness must be calculated for each specific case.

Does a thin-film coating facilitate inspections?

While traditional multilayer systems with removable external jacketing make inspections difficult, thin-film coatings significantly improve accessibility.

A Customized Solution for Every Project

Selecting industrial tank insulation should not be based solely on heat loss reduction.

Heat loss, condensation, CUI risk, tank geometry, and future inspection accessibility must all be evaluated together.

Savenergy.it offers ultra-thin industrial nanotechnological insulation suitable for tanks, silos, piping, and metal equipment.

To determine the most suitable coating cycle for your facility or request technical information, contact us at info@savenergy.it or fill out the form

Eng. Elena Galeotti – 15/09/2026

Technician spray applying thermal insulation coating AES TECH to an industrial furnace

Industrial Furnaces Insulation: Reducing Heat Loss and Radiant Heat from the Outside

Industrial Furnaces Insulation: Reducing Heat Loss and Radiant Heat from the Outside

Summary: Industrial furnaces insulation does not always require intervention on the internal refractory lining. When the external metal casing of a furnace reaches high temperatures and releases heat into the production area, an external thermal insulation treatment may be worth evaluating. AES Tech is an ultra-thin nanotechnology-based insulating coating that can be applied by spray in thicknesses of 1–4 mm. By measuring the actual temperature of the furnace casing before treatment, it is possible to assess whether external insulation can help reduce heat transfer, surface temperature and radiant heat without modifying the internal refractory system.

By Eng. Elena Galeotti – August 27, 2026

Technician beside the external metal casing of an industrial furnace in a production facility

The external metal casing of an industrial furnace can be assessed to determine whether an external thermal insulation treatment may help reduce heat loss and radiant heat.

In This Article

  • Where industrial furnaces lose heat
  • Why radiant heat matters inside a production facility
  • When external furnace insulation can be useful
  • How AES Tech is applied
  • Which types of furnaces can be evaluated
  • Why external surface temperature is the key parameter
  • A real AES Tech application&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;lt;/li>
  • Savenergy.it pre-assessment protocol
  • FAQ

Where Does an Industrial Furnace Lose Heat?

When industrial furnace efficiency is analysed, attention often focuses on burners, exhaust gases, heat recovery systems and process control.

However, heat can also be lost through the external furnace envelope.

Walls, doors, covers, ducts, joints and other external surfaces can transfer thermal energy to the surrounding environment through convection and radiation.

This means that a furnace can be operating correctly from a process point of view while still releasing a significant amount of heat through its external casing.

Large hot surfaces can contribute to the thermal load inside the production area even when their temperature appears relatively moderate compared with the internal process temperature.

This is one of the reasons why industrial furnace insulation should be assessed by looking not only at the internal temperature, but also at the actual temperature of the external surfaces.

Radiant Heat from Industrial Furnaces

Anyone standing close to a hot industrial furnace can often perceive heat without touching the equipment.

This is mainly due to radiant heat emitted by the external surface.

In facilities where several furnaces, drying ovens or other hot machines operate simultaneously, heat released by the equipment can contribute to:

  • higher temperatures in the surrounding working areas;
  • less favourable conditions for operators;
  • more demanding maintenance activities;
  • increased ventilation or cooling requirements;
  • unnecessary energy transfer from the process to the building.

When technically possible, reducing the external surface temperature means acting directly on the source of radiant heat.

Instead of managing the heat after it has entered the working environment, the objective is to reduce the amount of heat transferred through the furnace envelope.

Industrial Furnaces Insulation from the Outaside

Many industrial furnaces already contain refractory materials and internal insulation specifically designed for their operating conditions.

For this reason, external insulation should not be considered an automatic replacement for the original refractory or thermal design.

However, improving an existing furnace from the inside may require:

  • stopping the equipment;
  • removing components;
  • dismantling part of the refractory system;
  • rebuilding the internal layers after the intervention.

In certain situations, it can therefore be useful to consider a different approach:

applying thermal insulation directly to the accessible external metal casing.&amp;amp;lt;/strong>&lt;/p>

External insu

lation for industrial furnaces can be particularly interesting when the internal refractory system should not be modified or when conventional external insulation systems would create excessive thickness.

AES Tech: Industrial Thermal Insulation in 1–4 mm

<p>AES Tech is a nanotechnology-based thermal insulation coating developed for industrial applications.

It is applied in indicative thicknesses of 1 to 4 mm and is primarily installed using an Airless spray system.

Technician spray applying thermal insulation coating AES TECH to an industrial furnace

Spray application of AES Tech on the external metal casing of an industrial furnace, creating an ultra-thin continuous thermal insulation layer.

Roller or brush application can also be considered for small or difficult-to-access areas.

The extremely low thickness can be particularly useful on industrial equipment where conventional insulation panels, blankets or jackets may:

  • require additional space;
  • interfere with access;
  • be difficult to install around complex geometries;
  • require additional containment structures.

AES Tech follows the geometry of the substrate and can therefore be applied to metal surfaces, curves, joints, doors and irregular areas.

AES Tech is suitable for applications up to 240 °C.

However, the actual suitability of the system must always be evaluated according to the temperature of the surface to be treated and the real operating conditions.

Which Industrial Furnaces Can Be Evaluated for external insulation?

External thermal furnaces insulation can be considered for equipment with a hot, accessible metal casing.

Potential applications include:

  • drying ovens;
  • paint curing ovens;
  • industrial dryers;
  • hot chambers;
  • furnaces for resins and composites;
  • preheating equipment;
  • low- and medium-temperature process systems;
  • other industrial machinery with hot external surfaces.

The type of furnace alone, however, does not determine whether the intervention is suitable.

The most important parameter is often something much simpler: the actual temperature of the external metal surface during normal operation.

Internal Temperature Is Not Enough

To design a correct thermal furnaces insulation the internal temparature in not enough.

Two industrial furnaces operating at the same internal process temperature can have completely different external surface temperatures.

Why?

Because the temperature of the external casing depends on several factors:

  • furnace construction;
  • refractory stratigraphy;
  • condition of the existing insulation;
  • thermal bridges;
  • doors and joints;
  • equipment geometry;
  • operating cycle.

For this reason, knowing only that a furnace operates, for example, at a certain internal temperature is not sufficient to design an external furnaces insulation intervention.

The surface temperature of the casing must be measured directly.

This is one of the most important preliminary steps in evaluating industrial furnace insulation.

Before Insulating a Furnace: Measure the Surface Temperature

Technician measuring the external surface temperature of an industrial furnace with an infrared thermometer, a very important activity when ypu have to design the thermal insulation of furnaces.

Measuring the external surface temperature is a key step in assessing heat loss and determining whether industrial furnace insulation should be applied.

A technically sound assessment should begin with an inspection and a few essential measurements.

The most useful information includes:

  • internal process temperature;
  • external surface temperature;
  • ambient temperature;
  • dimensions of the hot surfaces;
  • annual operating hours;
  • substrate material and condition;
  • presence of particularly hot areas;
  • space and accessibility constraints.

Infrared temperature measurements can provide an initial indication of surface conditions.

Thermal imaging can also be useful for identifying areas such as:

  • doors;
  • joints;
  • edges;
  • panels;
  • connections;
  • thermal bridges.

These areas may operate at temperatures higher than the surrounding casing.

The objective is to establish a measurable situation before the treatment of thermal furnaces insualtion, so that any change in surface temperature can also be verified afterwards.

Why External Application Can Simplify the Intervention

Accessibility is an important consideration for maintenance managers.

A thin coating applied directly to the metal casing follows the shape of the equipment without requiring the volume associated with many conventional insulation systems.

This can be useful around:

  • doors;
  • curves;
  • fittings;
  • joints;
  • narrow passages;
  • irregular surfaces.

When the specific operating conditions permit it, an external treatment can also avoid modifications to the internal refractory system.

This does not automatically mean that the furnace can always remain in operation during application.

Surface preparation, application temperature, site safety and the condition of the equipment must be assessed for each project.

Real Case: Surface Temperature Reduced from 80 °C to 31 °C

A real AES Tech application provides a useful example of why surface temperature measurements are essential.

In a heating plant, AES Tech was applied to industrial pipework at a thickness of approximately 3 mm.

 

Industrial pipes insulated with AES Tech in a heating plant

Industrial pipework treated with approximately 3 mm of AES Tech in a real application where the measured surface temperature decreased from about 80°C to about 31°C.

The measured surface temperature was:

Before application: approximately 80 °C

After application: approximately 31 °C

 

This result refers to a specific application on industrial pipework.

It should not be interpreted as a performance guarantee for an industrial furnace.

The final temperature obtained after treatment depends on several variables, including:

  • initial surface temperature;
  • substrate material;
  • geometry;
  • applied thickness;
  • ambient conditions;
  • operating conditions.

The case study nevertheless demonstrates an important methodological point.

When evaluating industrial furnace insulation, performance should be assessed using the real temperatures of the equipment before and after the intervention rather than relying only on generic theoretical assumptions.

Savenergy.it Pre-Assessment Protocol

What Information Do We Need to Evaluate an Industrial Furnaces insulation?

Before proposing an AES Tech intervention, Savenergy.it analyses the real operating conditions of the equipment.

The preliminary information normally includes:

  • internal process temperature;
  • external casing temperature during normal operation
  • ambient temperature;
  • substrate material;
  • condition of the external surface;
  • approximate dimensions of the hot areas;
  • operating hours;
  • doors, joints, edges or other hotter areas;
  • space restrictions;
  • accessibility constraints;
  • photographs of the equipment.

The internal furnace temperature alone is not sufficient.

Two furnaces operating under similar process conditions can have very different external surface temperatures and may therefore require different technical evaluations.

Industrial Furnaces Insulation Should Start from Real Data

The objective is not simply to “insulate a furnace”.

For a plant manager or maintenance engineer, the real questions are:

How much heat is being transferred through the external casing?

Which areas have the highest surface temperatures?

Can these temperatures be reduced without modifying the internal refractory lining?

Would a few millimetres of external insulation solve a space or accessibility problem?

These questions make the assessment much more useful than simply choosing an insulation material based on its nominal properties.

External insulation with AES Tech can be particularly interesting when:

    • the metal casing is hot;
    • the surface is accessible;
    • available space is limited;
    • conventional insulation systems are difficult to install;
    • modifying the internal refractory system would be invasive.

Every industrial furnace is nevertheless different.

A technical assessment of temperatures, geometry, substrate and operating conditions is therefore necessary before defining the intervention and the appropriate thickness.

FAQ – Industrial Furnace

s Insulation

What Is External Industrial Furnaces Insulation?

External industrial furnaces insulation consists of applying an insulating system to the accessible outer surface of the furnace rather than modifying its internal refractory layers.

With AES Tech, the treatment consists of an ultra-thin insulating coating applied directly to the external metal casing.

Is It Necessary to Remove the Internal Refractory Lining

Not necessarily.

If the intervention is designed for the external casing, its purpose is precisely to work from the outside without directly modifying the refractory lining.

The feasibility of this approach must nevertheless be verified for the specific furnace.

Can External Insulation Reduce Radiant Heat?

Reducing the temperature of the treated external surface can also reduce the radiant heat emitted by that surface.

The actual result depends on factors such as initial temperature, substrate, coating thickness, geometry and operating conditions.

For this reason, surface temperatures should be measured before and after treatment.

How Thick Is AES Tech?

AES Tech is used for industrial thermal insulation in thicknesses of approximately 1–4 mm, depending on the application and the thermal objective.

Can AES Tech Be Applied to an Existing Furnace?

Yes.

Existing industrial machinery and metal structures are among the applications that can be evaluated for AES Tech.

Before application, the condition of the substrate, surface temperature, required preparation and operating conditions must be checked.

What Is the Maximum Application Temperature for AES Tech?

AES Tech is suitable for applications up to 240 °C.

The relevant parameter when assessing an existing furnace is the temperature of the external surface to be treated, not simply the internal process temperature.

How Is AES Tech Applied?

AES Tech is primarily applied using an Airless spray system.

Spray application allows the coating to follow complex geometries, joints, curves and irregular metal surfaces while maintaining very low thickness.

Roller or brush application can also be used on limited areas when appropriate.

Can AES Tech Be Applied Without Stopping the Furnace?

This must be evaluated case by case.

The possibility of working while the equipment is operating depends on:

  • actual surface temperature;
  • required surface preparation;
  • application conditions;
  • accessibility;
  • site safety requirements.

External application can potentially reduce the need for invasive work on the internal refractory system, but operating conditions must always be technically assessed.

Would You Like to Evaluate Heat Loss  and Thermal insulation for Your Industrial Furnace?

If your plant includes furnaces, dryers or other industrial machinery with hot external surfaces, a preliminary technical assessment can start from a few simple data points.

Send us:

  • photographs of the equipment;
  • internal process temperature;
  • measured external surface temperature;
  • approximate dimensions of the hot areas;
  • information on operating conditions.

Savenergy.it can evaluate whether AES Tech is suitable for the application and identify the areas where external insulation may be most useful.

For further information, contact info@savenergy.it.

or fill in the form https://www.savenergy.it/en/contact/

📹Follow us on   Facebook   to discover our full range or products for industrial thermal insulation.

Flange insulation: low-thickness nanotechnology coating for critical plant points

Flange insulation: low-thickness nanotechnology coating for critical plant points Initial summary Flange insulation is one of the most delicate aspects of thermal management in industrial piping. Flanges are connection, fastening and inspection points: they need thermal protection, but they must also remain accessible for inspections, maintenance and possible disassembly. For this reason, in many plants, […]

Read more

Dairy Industry Piping: Why a Low-Thickness Thermal Coating Can Make a Difference

Dairy Industry Piping: Why a Low-Thickness Thermal Coating Can Make a Difference

Summary: in the dairy industry, the thermal management of piping affects process efficiency, condensation control, and operational continuity. A thermal coating for dairy piping can be an interesting solution when low thickness, fast application, and adaptability to complex lines, bends, valves, and metal surfaces are required. Savenergy.it products are nanotechnology-based thermal insulation solutions for industrial applications, specifically designed for interventions on piping, tanks, containers, cold rooms, and other technical surfaces.

Summary Index

  • Why piping is a critical point in dairy plants
  • Heat loss, condensation, and limited space
  • The advantage of low thickness
  • Where a thermal coating can be useful
  • FAQ

Why piping is a critical point in dairy plants

Industrial stainless steel pipes and valves in a dairy facility with Thermal Coating for Dairy Piping applications.

Industrial stainless steel pipes and valves in a dairy facility with Thermal Coating for Dairy Piping applications.

In the dairy sector, piping is not just a connection element between machines and tanks. It carries milk, hot water, chilled water, service fluids, and cleaning solutions, directly contributing to the stability of the production process. For this reason, insulating the lines can become a significant technical issue.

In this context, a thermal coating for dairy piping makes it possible to intervene on metal surfaces that often operate in environments where temperature, humidity, and frequent washdowns put materials under severe stress. Savenergy.it products are low-thickness nanotechnology-based thermal insulating coatings designed for industrial applications on piping, metal equipment, tanks, and cold rooms.

Heat loss, condensation, and limited space often make a thermal coating for dairy piping necessary

In dairy processing lines, heat loss can increase energy consumption and make it more difficult to maintain the desired operating conditions. Another important aspect is surface condensation, which in many production environments represents a critical issue that must be carefully monitored.

This is where the issue of thermal coating for dairy piping comes into play. When piping runs through technical areas, narrow passages, or zones with bends, flanges, supports, and valves, traditional high-thickness insulation systems are not always the most practical solution. Savenergy.it products are specifically designed to provide industrial thermal insulation with reduced thickness, anti-condensation performance, and airless spray application, a feature that is especially useful when plant geometry is complex.

The advantage of low thickness for a thermal coating applicable to dairy piping

In a dairy plant, the challenge is not only to insulate, but to insulate without making the system more complicated. Where there are closely spaced lines, valves, fittings, and sections that are difficult to cover, bulkier systems may become less practical.

Here, low thickness represents a real operational advantage. AES TECH is a semi-liquid nanocomposite solution for industry, applicable directly onto metal after substrate preparation, with installation recommended in multiple coats by airless spray. Its limited thickness, from 1 to 4 mm, makes it possible to consider the intervention even where line geometry makes traditional insulation more difficult.

Manti Ceramic Technological M follows the same application logic, with an indicative thickness of 0.6–2.0 mm, making it an interesting option when thermal protection and reduced bulk are required on metal and technical surfaces.

Which technical data are really relevant for a thermal coating for dairy piping

When evaluating a solution for insulating piping in the dairy industry, some data are more useful than others.

For AES TECH:

  • application thickness: 1.0–4.0 mm
  • fire reaction: Euroclass A
  • VOC content: < 0.003 μg/l (UNI EN ISO 16000-9:2024, 160000-6:2021, 16000-3:2022)
  • industrial application also on piping, containers, silos, metal equipment, tanks, and cold rooms

These data are important because they help show that the product fits into a different logic compared to traditional high-thickness insulation materials. The conductivity of 0.001 W/mK highlights the possibility of working with very limited thicknesses on metal substrates and industrial systems.

Industrial piping in a food environment, with some lines treated with AES TECH, a low-thickness solution also suitable for bends, valves, and fittings.

Insulated dairy piping with AES TECH thermal coating on metal pipes, valves, and bends in a processing plant.

Industrial piping in a food environment, with some lines treated with AES TECH, a low-thickness solution also suitable for bends, valves, and fittings.

Where a thermal coating can be useful

In the dairy industry, a system of this type may be considered for:

  • metal process piping;
  • hot/cold service lines;
  • sections with bends, joints, and valves;
  • technical surfaces where low thickness is a priority;
  • plants where the bulk of the insulation must be kept to a minimum.

Savenergy.it products are water-based thermal protective coatings, formulated for industrial applications and characterized by good adhesion on various surfaces.

A technical choice to be evaluated case by case

In dairy plants, there is no single solution suitable for every line. Operating temperatures, washdowns, production cycles, the existing substrate, and accessibility all influence the choice. For this reason, it is useful to evaluate materials and layer build-up according to the actual system.

Savenergy.it products are designed to meet specific industrial needs, especially when thermal insulation, condensation elimination, fast installation, and reduction of overall thickness are required. In a demanding sector, a thermal coating for dairy piping can therefore represent an interesting technical solution for improving line management without burdening the system with excessive bulk.

FAQ

Is a low-thickness thermal coating suitable for dairy plant piping?

It is a solution worth considering when reduced bulk, application on complex surfaces, and coating continuity on metal elements are required.

Why is low thickness important in the dairy industry?

Because in many industrial lines, space is limited and bends, valves, fittings, and supports must remain accessible.

How are Savenergy.it products applied?

For products in the industrial line, the application method consists of multiple coats using an airless sprayer, following the installation manual.

Are AES TECH and Technological M also suitable for other industrial applications?

Yes, also for containers, silos, metal equipment, tanks, and cold rooms.

Edited by Eng. Elena Galeotti | Published on April 14, 2026 | Updated on April 14, 2026

For more information about Savenergy.it products and their possible applications in the industrial sector, you can contact us at info@savenergy.it.

📹 Follow our facebook for video, case history and much more!

Insulation for Industrial Buildings: how to improve comfort, protection and condensation control with AES TECH and Technological M

Insulation for Industrial Buildings: how to improve comfort, protection and condensation control with AES TECH and Technological M

What you will read: Insulation for industrial buildings is essential when the goal is not only to reduce heat gain and heat loss, but also to improve indoor comfort, limit condensation and protect goods, equipment and metal surfaces. In industrial sheds, warehouses, hangars and agricultural buildings, roofs and walls are often the most exposed elements. With AES TECH and Technological M, we can intervene with very low thicknesses, adapting the solution to roofs, walls and technical surfaces according to the specific needs of the building.

By Eng. Elena Galeotti

What you will find in this article

  • Why insulation for industrial buildings is now a strategic issue
  • The most common problems affecting roofs and walls
  • The main differences between AES TECH and Technological M
  • Typical application scenarios in industrial and agricultural buildings
  • Why low-thickness insulation can be a practical advantage
  • FAQ

Industrial warehouse interior with high shelving and stored goods, example of insulation for industrial buildings

Why insulation for industrial buildings matters today

When we talk about insulation for industrial buildings, the discussion often focuses only on energy saving. In reality, the topic is much broader. In industrial, logistics and agricultural environments, an inefficient envelope can create overheating, cold internal surfaces, condensation and unstable indoor conditions.

This directly affects:

  • worker comfort
  • the preservation of goods and packaging
  • the durability of metal surfaces
  • the efficiency of storage and production areas
  • the continuity of operations

In industrial sheds, warehouses, hangars, livestock buildings and agricultural facilities, roofs and walls are continuously exposed to solar radiation, cold, humidity and sudden weather changes. That is why choosing the right solution for insulation for industrial buildings is not just a technical detail, but a practical decision that can affect the daily use of the building.

The most common problems in industrial roofs and walls

1. Overheating in summer

Metal roofs can absorb a high amount of solar radiation and transfer heat indoors. This can increase discomfort and put additional stress on cooling systems.

2. Cold surfaces and condensation

In winter or during seasonal transitions, poorly insulated walls and roofs can cool down quickly. This may create surface condensation, especially where indoor and outdoor temperatures differ significantly.

3. Damage to goods and technical components

Condensation and thermal fluctuations can affect:

  • paper and cardboard packaging
  • raw materials and semi-finished products
  • sensitive equipment
  • metal elements exposed to corrosion risks

4. Difficult interventions on existing buildings

Many industrial buildings require fast and low-impact solutions, especially when production or storage activities cannot stop for long.

Our approach to insulation for industrial buildings

At Savenergy, we work with nanotechnological thermal insulation systems designed for industrial applications where low thickness, versatility and practical installation are essential.

Our range includes:

  • AES TECH, with an application thickness of approximately 1 to 4 mm
  • Technological M, with an application thickness of approximately 0.6 to 2 mm

Both solutions are designed for very low-thickness applications, but they are not identical. Each product has strengths that make it more suitable in specific cases.

Technical overview: AES TECH

What it is

AES TECH is a nanotechnological thermal coating developed for industrial applications, especially on metal and technical surfaces.

Indicative application thickness

  • 1–4 mm

Best suited for

  • metal walls
  • tanks
  • pipes
  • technical surfaces
  • cold rooms
  • industrial equipment
  • critical internal points affected by thermal stress or condensation
  • can be applied also on concrete, cement, wood, PVC etc.

Main strengths

  • higher applicable thickness compared to Technological M
  • easy airless application
  • suitable for industrial metal surfaces
  • useful where stronger insulation contribution is required
  • low-thickness intervention on technically sensitive elements

When we usually recommend it for the Insulation for industrial buildings

We usually recommend AES TECH when the project focuses on metal walls, industrial components or localised areas where condensation, thermal fluctuation or heat transfer must be reduced without bulky build-ups.

Technical overview: Technological M

What it is

Technological M is a nanotechnological thermal and waterproofing coating particularly suitable for industrial and agricultural roofs and external surfaces.

Indicative application thickness

  • 0.6–2 mm

Best suited for

  • industrial roofs
  • agricultural roofs
  • external envelopes
  • mixed substrates
  • surfaces exposed to strong solar radiation

Applicable on

  • metals
  • concrete
  • cement
  • wood
  • PVC
  • plastics
  • other heterogeneous substrates

Main strengths

  • thermal protection combined with waterproofing effect
  • very versatile on different substrates
  • especially useful on roofs and exposed outer surfaces
  • low-thickness solution for large surfaces

When we usually recommend it for the Insulation for industrial buildings

We usually recommend Technological M when the main issue concerns the roof, the outer envelope, summer overheating, waterproofing needs or the treatment of surfaces exposed to weather and solar radiation.

Sun-exposed metal roof of an industrial building, example of insulation for industrial buildings

AES TECH and Technological M: quick comparison

AES TECH

  • Thickness: 1–4 mm
  • Focus: metal and technical surfaces
  • Best for: walls, tanks, pipes, cold rooms, industrial elements
  • Key advantage: greater applicable thickness where higher insulation contribution is needed

Technological M

  • Thickness: 0.6–2 mm
  • Focus: roofs and outer surfaces
  • Best for: industrial sheds, agricultural buildings, external coverings
  • Key advantage: thermal protection plus waterproofing on exposed surfaces

Main application scenarios of the Insulation for industrial buildings

1. Industrial sheds with sun-exposed metal roofing

This is one of the most common cases. During summer, sheet-metal roofs can become a major source of indoor heat. In these situations, Technological M is particularly valuable because it works directly on the roof and also adds waterproofing protection.

2. Storage warehouses with sensitive goods

In warehouses, the issue is not only people’s comfort. Thermal peaks and condensation can damage packaging, components, raw materials and stored products. Here, insulation for industrial buildings becomes an operational necessity as well as a technical one.

3. Hangars and large-volume structures

In hangars or lightweight industrial buildings, very large internal volumes make indoor climate control more complex. If the roof overheats in summer or cools too quickly in winter, discomfort increases and HVAC systems work harder.

4. Livestock and agricultural buildings

In these environments, microclimate control is essential. Roof overheating may increase heat stress, while condensation can worsen indoor hygiene and environmental conditions. Technological M can be especially useful on roofs, while AES TECH can be considered for other critical metal elements.

5. Metal walls affected by condensation

When the main issue is a cold inner wall, AES TECH is often one of the most interesting options because it is particularly suitable for industrial metal surfaces and technical applications.

6. Mixed-substrate buildings

Not all industrial structures are uniform. Many include metal, wood, PVC or plastic components. In these cases, using low-thickness systems that adapt to different surfaces can be a major practical advantage.

7. Buildings that require fast, low-impact work

Where production cannot stop for long, airless spray application and reduced thickness can make the intervention more manageable and less invasive than traditional high-thickness systems.

A key advantage: low thickness and practical flexibility for the Insulation for industrial buildings

One of the most interesting aspects of our solutions is the balance between insulation performance and limited thickness.

This can be particularly useful when:

  • the structure should not be overloaded
  • internal volume must be preserved
  • the building is already in use
  • traditional insulation would be too invasive
  • the intervention must adapt to complex surfaces

For industrial projects, low thickness is not only a technical value. It is often a practical advantage that can simplify the whole intervention.

How we choose between AES TECH and Technological M for the Insulation for industrial buildings

In general, we tend to highlight:

  • Technological M when the main issue concerns the roof, the external envelope or waterproofing needs
  • AES TECH when the intervention focuses on metal walls, technical surfaces, industrial equipment or areas where a greater thickness is needed

In many cases, the right approach is not to think in abstract terms about one product only, but to assess:

  • the type of roof
  • the type of wall
  • the substrate
  • the intended use of the building
  • the main thermal and condensation-related critical points

Conclusions

Insulation for industrial buildings is no longer just a matter of reducing energy consumption. It is a decision that affects comfort, condensation control, protection of goods, surface durability and the day-to-day functionality of industrial and logistics spaces.

Industrial sheds, warehouses, hangars, depots and agricultural buildings all have different needs, but one principle remains the same: roofs and walls must be treated with solutions that fit the real materials, the real loads and the real critical issues of the building.

With AES TECH and Technological M, we can address these needs through a low-thickness, flexible and technically focused approach.

For more information or to evaluate the most suitable solution for your project, contact us at info@savenergy.it.

📹 Follow our facebook for video, case history and much more!

FAQ about Insulation for industrial buildings

Can AES TECH and Technological M both be used for insulation for industrial buildings?

Yes. Both are suitable for industrial applications, but with different areas of focus. Technological M is especially interesting for roofs and external surfaces, while AES TECH is particularly suitable for metal walls, technical surfaces and industrial elements that require greater thickness. Furthermore, the two products can also be used in combination, for example by insulating a roof with 2 mm of AES TECH plus 1 mm of Technological M.

Do these products help reduce condensation?

Yes. By improving the thermal behaviour of roofs and walls, they can help reduce cold spots and limit the conditions that favour surface condensation.

Is Technological M suitable for agricultural and livestock buildings?

Yes. It can be especially useful on roofs in agricultural and livestock buildings, where reducing heat load and controlling moisture-related issues is important.

Why choose a low-thickness insulation solution in industry?

Because it allows intervention without large build-ups, without significantly reducing usable space and with faster, more practical application even on existing buildings.

Thermal Plant Pipe Insulation: The Case of a Residential Building in Milan

Case Study: Thermal insulation of central heating system pipes with AES TECH

An effective solution to improve energy efficiency

What you will read In this article, you will find useful information about thermal plant pipe insulation. In the heart of Milan, a central thermal plant serving a residential building has recently undergone a significant energy requalification through the application of the nanotechnology-based coating AES TECH. This case study highlights how the thermal plant pipe insulation using high-performance, low-thickness products can drastically improve energy efficiency, reduce thermal loss, and simplify maintenance operations.

SUMMARY

✅ Context of the intervention: initial challenges and motivation

✅ Why choose AES TECH: technical features and product benefits

✅ Application phases: preparation, spray application, curing

✅ Results achieved: enhanced insulation, safety, and reduced maintenance

✅ Conclusions: a replicable model for both residential and industrial systems

In the context of plant requalification projects, the thermal plant pipe insulation is a strategic action to reduce energy dispersion and improve overall system performance. In this specific case, AES TECH was used to insulate the pipes of a residential heating system. The outcome was remarkable: enhanced thermal insulation with minimal space occupancy and no need for invasive construction work.

Why insulate heating system pipes?

Generally speaking, in centralized heating systems, pipes are one of the primary sources of heat loss, especially when outdated or insufficient insulation materials are used. Consequently, poor insulation leads to increased energy consumption to maintain proper supply and return temperatures, ultimately resulting in higher energy bills for residents.

Fortunately, using nanotechnology-based materials such as AES TECH for thermal plant pipe insulation drastically reduces these losses. Indeed, this is made possible by the product’s high reflectivity and controlled emissivity.

AES TECH: performance and specifications

AES TECH is a semi-liquid nanocomposite thermal coating designed for industrial applications. Notably, thanks to its hollow ceramic nanospheres and patented binder, it ensures exceptional insulation performance at a thickness of only 1 to 4 mm:

  • Thermal conductivity λ = 0.0010 W/mK
  • Thermal reflectivity: 91%
  • Fire reaction rating: Euroclass A1
  • Spray application with Airless pump
  • Water-based, solvent-free, VOC-free

Therefore, its thin-layer profile makes it ideal for technical rooms and limited-space applications.

Case execution: thermal plant pipe insulation with AES TECH

The intervention was carried out in two stages:

  1. Cleaning of the metal piping;
  2. Two spray coats of AES TECH with an Airless system.

 

thermal plant pipe insulation with the low thickness AES TECH coating

Key benefits achieved:

  • Immediate reduction of heat loss in both supply and return lines;
  • Increased safety due to the fire-resistant nature of the product;
  • Elimination of thermal bridges without increasing volume;
  • Long-term durability with zero maintenance, thanks to excellent adhesion and material stability.

A replicable and sustainable solution of thermal plant pipe insulation

In conclusion, this project shows that thermal plant pipe insulation with AES TECH is not only effective but also quick, sustainable, and cost-efficient. Consequently, it can be easily replicated in other residential and industrial settings, supporting the broader goal of energy transition in building infrastructures.

🔵 For more technical details or a personalized consultation, contact us at info@savenergy.it

📹 Follow our facebook for video, case history and much more!

Reduce energy consumption, protect your goods, and maximize interior space with high-performance, ultra-thin insulation coatings.

Thermal Insulation of Refrigerated Containers: the Nanotechnological Solution for an Efficient Cold Chain

Discover why the thermal insulation of refrigerated containers is a key factor in temperature-controlled logistics. We examine the limitations of traditional systems and present the benefits of cutting-edge nanotechnological coatings designed for high performance at minimal thickness.

📑 Contents

  • Why thermal insulation for refrigerated containers is essential
  • Weaknesses of traditional insulation systems
  • Features of advanced nanotechnological coatings
  • Operational and logistic benefits
  • Final thoughts and contact information

❄️ Why the thermal insulation of refrigerated containers is essential

In the transportation of food, pharmaceuticals, cosmetics, and sensitive goods, refrigerated containers must maintain consistent internal temperatures. Even with active refrigeration units, passive thermal insulation plays a critical role in:

  • Reducing energy consumption
  • Preventing thermal shock and external temperature fluctuations
  • Minimizing internal condensation
  • Extending autonomy during breakdowns
  • Protecting cargo and enhancing sustainability

⚠️ The limitations of traditional insulation for refrigerated containers

Conventional materials like polyurethane foam present several issues when used for thermal insulation refrigerated containers:

  • Bulky thickness that reduces usable interior volume
  • Limited effectiveness against radiant heat
  • Moisture absorption and potential for mold growth
  • Difficult application in retrofit projects
  • Fire safety and toxicity concerns

For these reasons, many companies are now switching to modern, high-performance alternatives.

thermal insulation of refrigerated containers with low thickness AES TECH insulation, spray-applied

🚀 Advanced features of nanotechnological coatings for refrigerated containers

Latest-generation nanotech coatings, such as Technological M and AES Tech, offer an innovative approach to thermal insulation of refrigerated containers, thanks to their shared advanced characteristics:

  • Extremely high solar reflectance (SRI > 111): repels solar and infrared radiation
  • Ultra-low thermal conductivity (λ ≈ 0.0010 W/mK)
  • Minimal thickness: from 1 to 4 mm
  • Waterproof yet vapor permeable: prevents condensation and mold
  • Non-toxic, fireproof, eco-friendly, and low VOC
  • Spray-applied for easy and uniform coverage
  • Excellent adhesion to metal, plastic, PVC, concrete, and wood
  • Certified durability and minimal maintenance

These coatings are ideal for both new containers and retrofitted cold storage or temporary housing units.

📦 Concrete benefits for refrigerated container use

✅ Improved internal temperature stability
✅ Reduced strain on cooling units
✅ Energy savings and lower operational costs
✅ Easy and fast application, even in retrofit scenarios
✅ No loss of usable space
✅ Moisture and mold protection
✅ Long-lasting performance without degradation

Thermal insulation of refrigerated containers can now be achieved with just a few millimeters of spray-applied AES Tech.

📈 Ideal applications of thermal insualtion for refrigerated containers

Use Case Benefits
Refrigerated containers for food and pharma logistics Reliable cold chain maintenance
Containers converted into static cold rooms Quick retrofit, no structural work
Maritime and industrial environments Resistant to vibrations, humidity, and aggressive agents
Extreme climates High solar reflectance and stable thermal protection

✅ Conclusions

Thermal insulation of refrigerated containers is now a challenge that requires smart, high-performance technologies. With nanotechnological coatings at ultra-low thickness, you can achieve high-efficiency insulation that’s eco-friendly, space-saving, and easy to apply—without altering the structure or reducing the internal capacity of the container.

📩 Want to find the best solution for your refrigerated containers?
Contact us at: info@savenergy.it

For Technological M visit also https://www.manticeramicitalia.it/en/industry/

Food Sector Tanks: How to Ensure Effective and Safe Thermal Insulation

Food Sector Tanks: How to Ensure Effective and Safe Thermal Insulation Thermal insulation tanks in food sector: hygiene, efficiency, and long-term performance The thermal insulation of tanks in the food sector requires hygienic, efficient, and safe solutions. AES Tech and Technological M offer a durable, non-toxic, and ultra-thin alternative to traditional systems. 📌 What you’ll […]

Read more

Thermal Coating Industrial Buildings: Energy Efficiency Starts Here

Smart Insulation for the Modern Industry

In today’s industrial environment, a thermal coating industrial buildings solution is a strategic choice to improve energy efficiency, reduce HVAC costs, and extend the lifespan of structures. Industrial buildings, warehouses, and workshops are often exposed to extreme temperature changes that strain materials, equipment, and working conditions.

To meet these challenges, Savenergy.it offers two high-performance nanotechnology-based solutions: Technological M and AES TECH. These coatings are designed to provide ultra-thin insulation that is easy to apply, long-lasting, and compatible with complex or existing surfaces.

thermal insulation for industrial buildings

Why Choose a Nanotechnology-Based Thermal Coating for Industrial Buildings

A thermal coating industrial buildings system based on nanotechnology is a step forward compared to traditional insulation methods. Thanks to the use of vacuum ceramic microspheres, these coatings act as true thermal shields: they block up to 85% of incoming thermal radiation, drastically reducing summer overheating and winter heat loss.

With just a few millimeters of thickness, they deliver performance comparable to several centimeters of conventional insulation. In addition, the application is fast via Airless spray technology, maintenance is minimal, and the coating provides excellent resistance to moisture, weather, and UV exposure.

Thermal Coating Industrial Buildings: Real Benefits for Industry

Both Technological M and AES TECH are ideal for metal roofs, concrete surfaces, wood or plastic elements, prefab panels, and both exterior and interior walls. The coating perfectly adapts to irregular geometries and ensures:

  • Better indoor thermal comfort

  • Reduced condensation

  • Long-term material protection

  • Immediate energy savings

Thanks to these features, a thermal coating industrial buildings application also becomes a sustainability investment, delivering measurable benefits for both the environment and operational costs.

Want to Learn More?

Contact us to receive expert advice on choosing between Technological M and AES TECH, depending on your facility’s specific needs.

📩 Write to us at for more information: info@savenergy.it

Savenergy.it Srl

Via Andrea Doria 56, 20124 Milano

contatti@savenergy.it – PEC: savenergy.it@pec.it




Condizioni di vendita

Area Riservata